Custom Flame Cut Steel Sprockets - Carbon and Alloy Steel

» If you have a print we can build it

» Flame Cut Steel Sprockets
The main focus at Rachels is manufacturing flame cut sprockets in carbon and alloy steel. Burning six inch plate, turning a five foot diameter piece and machining a two inch internal keyway is not a problem.

Flame Cut Steel Sprockets

4 Manual Cadillac Lathes
60" Swing and 85" Centers

Mitts & Merrill 3A Internal Keyseater
2" Maximum Key Width

2 Broaching Machines
3/4" and Smaller Keys

CNC Flame Cutting Machine Table
30' of Travel and Capable of Cutting 6" Plates

4' and 6' Radial Arm Drills

Vertical Milling Machines With 6' of Travel

Surface Grinder with 24" of Travel

Band Saws with 18" of Cut

6 Overhead MIG Welding Units for Carbon Steel

1 Fork Lift with 20,000 lb Capacity

2 Hoist Cranes on Rail with 2 Ton Capacity Each

Welding

2 Miller CP 300 Wire Welders

Hobart Model T-300 Stick Welder

2 Lincoln Model 250-250 Wire Welders

ACT 225ARC Heli Arc

Hobart Model TR0250H Stick Welder

2 Lincoln R3S-250 Wire Welders

Cobramatic Model MK-3A Welder

Hobart Model TR-250-HF Tig Welder

Material Handling Equipment

Two Bridge Cranes With 5 Tons Each

1 Forklift with 20,000 lb Capacity

1 Forklift with 5,000 lb Capacity

1 Forklift with 80,000 lb Capacity

Precision Machining Department | Flame Cut Steel Sprockets Department | Metal Fabrication, Conveyor, and Collector Department | Home